Folic Acid 59-30-3 Manufacturer Exporter MEDIOCON INC

  Folic Acid  Manufactured by Mediocon Inc 

 

·   Name: Folic Acid  Manufactured by Mediocon Inc

·   CAS No: 59-30-3

·   Molecular Weight: 441.4g/mol

·   Molecular formula: C₁₉H₁₉N₇O₆

·   Synonyms: vitamin B9, vitamin Bc

·   Chemical structure:

 

                                       

                                 

·   Appearance:

Yellow or orange crystalline powder.

·   Solubility:

   Solubility of Folic Acid

1. Water: Slightly soluble (0.0016 mg/ml at 25°C)

2. Ethanol: Slightly soluble (0.01 mg/ml at 25°C)

3. Methanol: Moderately soluble (0.1 mg/ml at 25°C)

4. DMSO: Highly soluble (100 mg/ml at 25°C)

5. Acetic acid: Moderately soluble (10 mg/ml at 25°C)

·   Use :

Medical Uses

1. Prevention of birth defects: Folic Acid  Manufactured by Mediocon Inc is essential for preventing birth defects of the brain and spine, such as spina bifida and anencephaly.

2. Treatment of megaloblastic anemia: Folic Acid  Manufactured by Mediocon Inc is used to treat megaloblastic anemia, a condition characterized by large red blood cells.

3. Treatment of folate deficiency: Folic Acid  Manufactured by Mediocon Inc is used to treat folate deficiency, which can cause fatigue, weakness, and shortness of breath.

 

Dietary Supplement Uses

1. Pregnancy and lactation: Folic Acid  Manufactured by Mediocon Inc is recommended for pregnant and breastfeeding women to support fetal development and maternal health.

2. Energy production: Folic Acid  Manufactured by Mediocon Inc is involved in energy production and can help alleviate fatigue and weakness.

3. Heart health: Folic Acid  Manufactured by Mediocon Inc may help lower homocysteine levels, which are associated with an increased risk of heart disease.

 

Food Fortification Uses

1. Cereal fortification: Folic Acid  Manufactured by Mediocon Inc is added to breakfast cereals and other grain products to prevent birth defects and support public health.

2. Bread and flour fortification: Folic Acid  Manufactured by Mediocon Inc is added to bread and flour to support public health and prevent birth defects.

 

Other Uses

1. Cosmetic uses: Folic Acid  Manufactured by Mediocon Inc is used in some cosmetics and skincare products to promote skin health and reduce the appearance of fine lines and wrinkles.

2. Veterinary uses: Folic Acid  Manufactured by Mediocon Inc is used in veterinary medicine to treat folate deficiency and promote health in animals.

 

Note: Folic Acid  Manufactured by Mediocon Inc should only be used under medical supervision, especially in high doses or for extended periods

Dosage forms :

Folic Acid  Manufactured by Mediocon Inc is available in various dosage forms to cater to different needs and preferences:

Oral Dosage Forms

1. Tablets: Available in strengths of 0.4 mg, 0.8 mg, and 1 mg.

2. Capsules: Available in strengths of 0.4 mg, 0.8 mg, and 1 mg.

3. Soft gels: Available in strengths of 0.4 mg, 0.8 mg, and 1 mg.

4. Oral solutions: Available in strengths of 0.1 mg/ml, 0.2 mg/ml, and 0.5 mg/ml.

Injectable Dosage Forms

1. IM injections: Available in strengths of 1 mg/ml, 5 mg/ml, and 10 mg/ml.

2. IV injections: Available in strengths of 1 mg/ml, 5 mg/ml, and 10 mg/ml.

Topical Dosage Forms

1. Creams: Available in strengths of 0.1%, 0.5%, and 1%.

2. Ointments: Available in strengths of 0.1%, 0.5%, and 1%.

Combination Products

1. Multivitamins: Folic Acid  Manufactured by Mediocon Inc is often combined with other vitamins and minerals in multivitamin products.

2. Prenatal vitamins: Folic Acid  Manufactured by Mediocon Inc is often combined with other essential nutrients in prenatal vitamin products.

 

Other Dosage Forms

1. Lozenges: Available in strengths of 0.4 mg, 0.8 mg, and 1 mg.

2. Gummies: Available in strengths of 0.4 mg, 0.8 mg, and 1 mg.

3. Powders: Available in strengths of 0.1 mg/g, 0.5 mg/g, and 1 mg/g.

Note: The availability of these dosage forms may vary depending on the country, region, or manufacturer.

 

.

·   Side Effects:

 

  Folic Acid  Manufactured by Mediocon Inc is generally considered safe and well-tolerated. However, like any supplement or medication, it   

  can cause side effects in some individuals.

 

·   Common Side Effects

1. Nausea and vomiting: Mild stomach upset, nausea, and vomiting can occur.

2. Diarrhea: Folic Acid  Manufactured by Mediocon Inc can cause diarrhea, especially when taken in high doses.

3. Abdominal cramps: Mild abdominal cramps and discomfort can occur.

4. Bloating and gas: Folic Acid  Manufactured by Mediocon Inc can cause bloating and gas in some individuals.

5. Headaches: Mild headaches can occur, especially when starting or stopping Folic Acid  Manufactured by Mediocon Inc supplements.

6. Fatigue: Some individuals may experience fatigue or lethargy when taking folic acid.

7. Sleep disturbances: Folic Acid  Manufactured by Mediocon Inc can cause insomnia or vivid dreams in some individuals.

·   Rare but Serious Side Effects

1. Allergic reactions: Rarely, Folic Acid  Manufactured by Mediocon Inc can cause allergic reactions, such as hives, itching, and difficulty breathing.

2. Anaphylaxis: In rare cases, Folic Acid  Manufactured by Mediocon Inc can cause anaphylaxis, a life-threatening allergic reaction.

3. Seizures: High doses of Folic Acid  Manufactured by Mediocon Inc can cause seizures in individuals with a history of seizure disorders.

4. Interference with medication: Folic Acid  Manufactured by Mediocon Inc can interact with certain medications, such as methotrexate, and reduce their effectiveness.

·   Long-term Side Effects

1. Masking vitamin B12 deficiency: Folic Acid  Manufactured by Mediocon Inc can mask the symptoms of vitamin B12 deficiency,

    leading to delayed diagnosis and treatment.

   2. Increased risk of cancer: Some studies suggest that high doses of Folic Acid  Manufactured by Mediocon Inc may increase the risk of      certain cancers, such as colorectal cancer.

 

·   Precautions and Contraindications

   1. Pregnancy and breastfeeding: Folic Acid  Manufactured by Mediocon Inc is generally considered safe during pregnancy and breastfeeding. However, high doses should be avoided.

2. Kidney disease: Individuals with kidney disease should consult their doctor before taking Folic Acid  Manufactured by Mediocon Inc supplements.

3. Liver disease: Individuals with liver disease should consult their doctor before taking Folic Acid  Manufactured by Mediocon Inc supplements.

    It's essential to consult with a healthcare professional before taking Folic Acid  Manufactured by Mediocon Inc supplements, especially if      

    you have any underlying medical conditions or take medications.

 

·   Why we need to take dose of Folic Acid?

 

Here are some reasons why taking a dose of Folic Acid  Manufactured by Mediocon Inc may be necessary:

 

Prevention of Birth Defects

1. Neural tube defects: Folic Acid  Manufactured by Mediocon Inc helps prevent neural tube defects, such as spina bifida and anencephaly, in newborns.

2. Congenital heart defects: Folic Acid  Manufactured by Mediocon Inc may also help prevent congenital heart defects.

 

Medical Conditions

1. Folic Acid  Manufactured by Mediocon Inc deficiency: Folic Acid  Manufactured by Mediocon Inc supplements can help treat Folic Acid  Manufactured by Mediocon Inc deficiency, which can cause fatigue, weakness, and shortness of breath.

2. Megaloblastic anemia: Folic Acid  Manufactured by Mediocon Inc is essential for the production of red blood cells, and a deficiency can lead to megaloblastic anemia.

3. Hyperhomocysteinemia: Folic Acid  Manufactured by Mediocon Inc helps reduce Homocysteine levels, which are associated with an increased risk of cardiovascular disease.

 

Dietary Needs

1. Pregnancy and lactation: Pregnant and breastfeeding women have a higher demand for folic acid, and supplements can help ensure adequate levels.

2. Vegans and vegetarians: Since Folic Acid  Manufactured by Mediocon Inc is found in dark leafy greens and other plant-based foods, vegans and vegetarians may require supplements to maintain adequate levels.

3. Older adults: As people age, their ability to absorb Folic Acid  Manufactured by Mediocon Inc from food decreases, making supplements necessary.

 

Other Reasons

1. Energy production: Folic Acid  Manufactured by Mediocon Inc plays a role in energy production and can help alleviate fatigue.

2. Mood support: Folic Acid  Manufactured by Mediocon Inc is involved in the synthesis of neurotransmitters, such as serotonin and dopamine, which regulate mood.

3. Cognitive function: Folic Acid  Manufactured by Mediocon Inc may help support cognitive function and memory.

 

It's essential to consult with a healthcare professional before taking Folic Acid  Manufactured by Mediocon Inc supplements to determine the appropriate dosage and ensure it's necessary for your specific needs.

 

·   How Folic Acid  Manufactured by Mediocon Inc  is synthesizing?

 

Folic acid, is synthesized through a multi-step process involving various enzymes and chemicals. Here's an overview of the synthesis process:

 

Microbial Synthesis

Folic Acid  Manufactured by Mediocon Inc is synthesized by microorganisms, such as bacteria and yeast, through the following steps:

 

1. Precursor synthesis: The synthesis begins with the production of precursors, such as para-aminobenzoic acid (PABA) and glutamic acid.

2. Pteridine ring formation: The precursors are then converted into a pteridine ring, which is the core structure of folic acid.

3. PABA incorporation: PABA is incorporated into the pteridine ring to form a dihydropteroate intermediate.

4. Dihydrofolate synthesis: The dihydropteroate intermediate is then converted into dihydrofolate through a series of enzyme-catalyzed reactions.

5. Tetrahydrofolate synthesis: Dihydrofolate is then reduced to form tetrahydrofolate (THF), which is the active form of folic acid.

 

Chemical Synthesis

Folic Acid  Manufactured by Mediocon Inc can also be synthesized chemically through a multi-step process:

 

1. Starting materials: The synthesis begins with the use of starting materials, such as PABA and glutamic acid.

2. Pteridine ring formation: The starting materials are then converted into a pteridine ring through a series of chemical reactions.

3. PABA incorporation: PABA is incorporated into the pteridine ring to form a dihydropteroate intermediate.

4. Dihydrofolate synthesis: The dihydropteroate intermediate is then converted into Dihydrofolate through a series of chemical reactions.

5. Folic Acid  Manufactured by Mediocon Inc synthesis: Dihydrofolate is then converted into Folic Acid  Manufactured by Mediocon Inc through a final series of chemical reactions.

 

Industrial Production

Folic Acid  Manufactured by Mediocon Inc is produced industrially through a combination of microbial and chemical synthesis:

 

1. Fermentation: Microorganisms, such as bacteria or yeast, are fermented to produce Folic Acid  Manufactured by Mediocon Inc precursors.

2. Purification: The precursors are then purified and converted into Folic Acid  Manufactured by Mediocon Inc through a series of chemical reactions.

3. Crystallization: The final step involves crystallizing the Folic Acid  Manufactured by Mediocon Inc to produce a pure and stable product.

 

Note: The exact process may vary depending on the manufacturer and the specific product being produced.

 

·   How to Identify Folic Acid  Manufactured by Mediocon Inc  Qualitatively?

Folic Acid  Manufactured by Mediocon Inc can be identified qualitatively through various chemical and physical tests. Here are some common methods:

 

Chemical Tests

1. Bratton-Marshall test: This test involves reacting Folic Acid  Manufactured by Mediocon Inc with sodium nitrite and sulfanilic acid to produce a pink-colored compound.

2. Diazo test: Folic Acid  Manufactured by Mediocon Inc reacts with diazotized sulfanilic acid to produce a red-colored compound.

3. Fluorescence test: Folic Acid  Manufactured by Mediocon Inc exhibits a characteristic fluorescence under UV light (365 nm).

 

Physical Tests

1. Melting point: Folic Acid  Manufactured by Mediocon Inc has a characteristic melting point range of 238-242°C.

2. Solubility: Folic Acid  Manufactured by Mediocon Inc is slightly soluble in water, but more soluble in alkaline solutions.

3. Crystalline form: Folic Acid  Manufactured by Mediocon Inc crystals have a characteristic needle-like or plate-like shape.

 

Chromatographic Tests

1. Thin-layer chromatography (TLC): Folic Acid  Manufactured by Mediocon Inc can be separated and identified using TLC with a suitable solvent system.

2. High-performance liquid chromatography (HPLC): Folic Acid  Manufactured by Mediocon Inc can be identified and quantified using HPLC with a suitable column and solvent system.

 

Spectroscopic Tests

1. UV-Vis spectroscopy: Folic Acid  Manufactured by Mediocon Inc exhibits a characteristic UV-Vis spectrum with absorption maxima at 256 nm and 282 nm.

2. Infrared (IR) spectroscopy: Folic Acid  Manufactured by Mediocon Inc exhibits a characteristic IR spectrum with absorption bands at 1650-1700 cm-1 and 1550-1600 cm-1.

3. Nuclear magnetic resonance (NMR) spectroscopy: Folic Acid  Manufactured by Mediocon Inc exhibits a characteristic NMR spectrum with signals corresponding to its molecular structure.

 

These tests can be used individually or in combination to identify Folic Acid  Manufactured by Mediocon Inc qualitatively.

 

 

·   What are the different Folic Acid  Manufactured by Mediocon Inc  different dosage forms and how it is prepared?

 

 Folic Acid  Manufactured by Mediocon Inc is available in various dosage forms, each with its own preparation method:

 

Oral Dosage Forms

1. Tablets: Folic Acid  Manufactured by Mediocon Inc tablets are prepared by mixing the active ingredient with excipients, such as lactose, starch, and magnesium stearate. The mixture is then compressed into tablets.

2. Capsules: Folic Acid  Manufactured by Mediocon Inc capsules are prepared by filling gelatin or vegetarian capsules with Folic Acid  Manufactured by Mediocon Inc powder.

3. Oral solutions: Folic Acid  Manufactured by Mediocon Inc oral solutions are prepared by dissolving the active ingredient in water or a flavored liquid.

4. Suspensions: Folic Acid  Manufactured by Mediocon Inc suspensions are prepared by mixing the active ingredient with a liquid, such as water or syrup, and adding suspending agents, such as xanthan gum.

 

 

 

Injectable Dosage Forms

1. Vials: Folic Acid  Manufactured by Mediocon Inc vials are prepared by filling sterile vials with a solution of Folic Acid  Manufactured by Mediocon Inc and a suitable solvent, such as water or saline.

2. Ampoules: Folic Acid  Manufactured by Mediocon Inc ampoules are prepared by filling sterile ampoules with a solution of Folic Acid  Manufactured by Mediocon Inc and a suitable solvent.

3. Prefilled syringes: Folic Acid  Manufactured by Mediocon Inc prefilled syringes are prepared by filling sterile syringes with a solution of Folic Acid  Manufactured by Mediocon Inc and a suitable solvent.

 

Topical Dosage Forms

1. Creams: Folic Acid  Manufactured by Mediocon Inc creams are prepared by mixing the active ingredient with a suitable cream base, such as petroleum jelly or lanolin.

2. Ointments: Folic Acid  Manufactured by Mediocon Inc ointments are prepared by mixing the active ingredient with a suitable ointment base, such as petroleum jelly or lanolin.

 

Other Dosage Forms

1. Lozenges: Folic Acid  Manufactured by Mediocon Inc lozenges are prepared by mixing the active ingredient with a suitable lozenge base, such as sugar or corn syrup.

2. Gummies: Folic Acid  Manufactured by Mediocon Inc gummies are prepared by mixing the active ingredient with a suitable gummy base, such as gelatin or pectin.

3. Powders: Folic Acid  Manufactured by Mediocon Inc powders are prepared by mixing the active ingredient with a suitable powder base, such as lactose or starch.

 

Preparation Methods

1. Granulation: Folic Acid  Manufactured by Mediocon Inc granules are prepared by mixing the active ingredient with excipients, such as lactose or starch, and then granulating the mixture.

2. Compression: Folic Acid  Manufactured by Mediocon Inc tablets are prepared by compressing the granules into tablets.

3. Encapsulation: Folic Acid  Manufactured by Mediocon Inc capsules are prepared by filling gelatin or vegetarian capsules with Folic Acid  Manufactured by Mediocon Inc powder.

4. Dissolution: Folic Acid  Manufactured by Mediocon Inc oral solutions are prepared by dissolving the active ingredient in water or a flavored liquid.

5. Suspension: Folic Acid  Manufactured by Mediocon Inc suspensions are prepared by mixing the active ingredient with a liquid, such as water or syrup, and adding suspending agents, such as xanthan gum.

 

Note: The specific preparation method may vary depending on the manufacturer and the specific product being produced.

 

 

·   What are the problems raised in manufacturing of dosage formulations of folic Acid?

Manufacturing dosage formulations of Folic Acid  Manufactured by Mediocon Inc can pose several challenges. Here are some common problems that may arise:

Chemical Stability Issues

1. Degradation: Folic Acid  Manufactured by Mediocon Inc is sensitive to light, heat, and moisture, which can cause degradation and loss of potency.

2. Oxidation: Folic Acid  Manufactured by Mediocon Inc can oxidize, leading to the formation of inactive compounds.

3. Hydrolysis: Folic Acid  Manufactured by Mediocon Inc can hydrolyze, leading to the formation of inactive compounds.

Physical Stability Issues

1. Polymorphism: Folic Acid  Manufactured by Mediocon Inc can exist in different polymorphic forms, which can affect its solubility and bioavailability.

2. Particle size and shape: The particle size and shape of Folic Acid  Manufactured by Mediocon Inc can affect its flowability, compressibility, and bioavailability.

3. Aggregation: Folic Acid  Manufactured by Mediocon Inc particles can aggregate, leading to a decrease in its surface area and bioavailability.

 

Formulation Challenges

1. Solubility: Folic Acid  Manufactured by Mediocon Inc has poor solubility in water, which can make it difficult to formulate into aqueous-based dosage forms.

2. Bioavailability: Folic Acid  Manufactured by Mediocon Inc has variable bioavailability, which can be affected by factors such as particle size, shape, and polymorphism.

3. Stability in dosage forms: Folic Acid  Manufactured by Mediocon Inc can degrade or oxidize in dosage forms, leading to a loss of potency.

Manufacturing Challenges

1. Contamination: Folic Acid  Manufactured by Mediocon Inc can be contaminated with impurities, such as heavy metals or residual solvents.

2. Variability in raw materials: The quality and characteristics of Folic Acid  Manufactured by Mediocon Inc raw materials can vary, affecting the final product's quality and consistency.

3. Scalability: Folic Acid  Manufactured by Mediocon Inc manufacturing processes may not be scalable, leading to difficulties in producing large batches.

Regulatory Challenges

1. Compliance with regulatory standards: Folic Acid  Manufactured by Mediocon Inc manufacturers must comply with regulatory standards, such as those set by the US FDA or European Medicines Agency.

2. Labeling and packaging requirements: Folic Acid  Manufactured by Mediocon Inc manufacturers must comply with labeling and packaging requirements, such as those related to ingredient labeling and tamper-evident packaging.

3. Stability testing and validation: Folic Acid  Manufactured by Mediocon Inc manufacturers must conduct stability testing and validation to ensure the product's quality and shelf-life.

Addressing these challenges requires careful consideration of factors such as raw material quality, manufacturing processes, formulation design, and regulatory compliance.

·   What is storage condition of Folic Acid  Manufactured by Mediocon Inc & its dosage forms ?

Folic Acid  Manufactured by Mediocon Inc and its dosage forms require specific storage conditions to maintain their stability, potency, and quality. Here are the recommended storage conditions:

 

Folic Acid  Manufactured by Mediocon Inc Bulk Powder

1. Temperature: Store at room temperature (20-25°C/68-77°F) or refrigerate (2-8°C/36-46°F) to slow down degradation.

2. Humidity: Store in a dry place, protected from moisture (relative humidity <60%).

3. Light: Protect from light, especially UV light, to prevent degradation.

4. Container: Store in a tightly sealed, light-resistant container, such as a glass or plastic bottle.

 

Folic Acid  Manufactured by Mediocon Inc Dosage Forms

1. Tablets: Store at room temperature (20-25°C/68-77°F) or refrigerate (2-8°C/36-46°F). Protect from moisture and light.

2. Capsules: Store at room temperature (20-25°C/68-77°F) or refrigerate (2-8°C/36-46°F). Protect from moisture and light.

3. Oral solutions: Store at room temperature (20-25°C/68-77°F) or refrigerate (2-8°C/36-46°F). Protect from light and moisture.

4. Injectable solutions: Store at refrigerated temperatures (2-8°C/36-46°F). Protect from light and moisture.

 

General Storage Recommendations

1. Avoid extreme temperatures: Avoid storing Folic Acid  Manufactured by Mediocon Inc and its dosage forms at extreme temperatures (above 30°C/86°F or below 0°C/32°F).

2. Keep away from direct sunlight: Direct sunlight can cause degradation and loss of potency.

3. Maintain humidity control: Maintain a relative humidity of <60% to prevent moisture-related degradation.

4. Use airtight containers: Store Folic Acid  Manufactured by Mediocon Inc and its dosage forms in airtight containers to prevent moisture and air from entering.

 

By following these storage recommendations, you can help maintain the stability, potency, and quality of Folic Acid  Manufactured by Mediocon Inc and its dosage forms.

 

·   What will be the Label  for Folic Acid  Manufactured by Mediocon Inc ?

 

 Here is a sample label for Folic Acid:

 

Label Requirements

1. Product Name: Folic Acid  Manufactured by Mediocon Inc Tablets/Capsules/Oral Solution

2. Strength: 400 mcg, 800 mcg, or 1 mg per tablet/capsule/5 mL oral solution

3. Inactive Ingredients: List of excipients, such as lactose, starch, magnesium stearate, and others

4. Dosage Instructions: Take one tablet/capsule orally once daily, or as directed by a healthcare professional

5. Warning: Keep out of reach of children. Do not exceed recommended dose.

6. Storage: Store at room temperature (20-25°C/68-77°F) or refrigerate (2-8°C/36-46°F). Protect from light and moisture.

7. Manufactured By: Name and address of the manufacturer

8. Distributed By: Name and address of the distributor (if applicable)

9. NDC Number: National Drug Code number (if applicable)

10. Expiration Date: Date of expiration or "Best By" date

 

 

 

Additional Labeling Requirements (as applicable)

1. Pregnancy and Breastfeeding Warning: If intended for use during pregnancy or breastfeeding, include a warning about potential risks.

2. Pediatric Warning: If intended for use in pediatric populations, include a warning about potential risks.

3. Allergen Warning: If the product contains common allergens, such as gluten or soy, include a warning.

4. Tamper-Evident Packaging: Include a statement indicating that the product is packaged in tamper-evident packaging.

 

Regulatory Compliance

1. FDA Compliance: Ensure compliance with FDA regulations, including labeling requirements.

2. USP Compliance: Ensure compliance with USP standards for folic acid.

3. cGMP Compliance: Ensure compliance with current Good Manufacturing Practice (cGMP) regulations.

 

Note: Labeling requirements may vary depending on the country, region, or regulatory agency. It's essential to consult with regulatory experts to ensure compliance with specific labeling requirements.

.

 

·    What are the packing available in folic acid?

 

Folic Acid  Manufactured by Mediocon Inc is available in various packaging options to cater to different needs and applications:

 

Solid Dosage Forms

1. Bottles: Folic Acid  Manufactured by Mediocon Inc tablets or capsules are packed in bottles made of glass or plastic, with capacities ranging from 30 to 1000 units.

2. Blister packs: Folic Acid  Manufactured by Mediocon Inc tablets or capsules are packed in blister packs, which are made of plastic or aluminum, with capacities ranging from 10 to 30 units.

3. Strip packs: Folic Acid  Manufactured by Mediocon Inc tablets or capsules are packed in strip packs, which are made of plastic or aluminum, with capacities ranging from 10 to 30 units.

 

Liquid Dosage Forms

1. Amber glass bottles: Folic Acid  Manufactured by Mediocon Inc oral solutions are packed in amber glass bottles, with capacities ranging from 100 ml to 500 ml.

2. HDPE bottles: Folic Acid  Manufactured by Mediocon Inc oral solutions are packed in HDPE (High-Density Polyethylene) bottles, with capacities ranging from 100 ml to 500 ml.

3. PET bottles: Folic Acid  Manufactured by Mediocon Inc oral solutions are packed in PET (Polyethylene Terephthalate) bottles, with capacities ranging from 100 ml to 500 ml.

 

Injectable Dosage Forms

1. Vials: Folic Acid  Manufactured by Mediocon Inc Injectable solutions are packed in vials made of glass, with capacities ranging from 1 ml to 10 ml.

2. Ampoules: Folic Acid  Manufactured by Mediocon Inc Injectable solutions are packed in ampoules made of glass, with capacities ranging from 1 ml to 10 ml.

3. Prefilled syringes: Folic Acid  Manufactured by Mediocon Inc Injectable solutions are packed in prefilled syringes made of plastic or glass, with capacities ranging from 1 ml to 10 ml.

 

Other Packaging Options

1. Sachets: Folic Acid  Manufactured by Mediocon Inc powder or granules are packed in sachets made of paper or plastic, with capacities ranging from 1 g to 10 g.

2. Tubes: Folic Acid  Manufactured by Mediocon Inc cream or ointment is packed in tubes made of plastic or aluminum, with capacities ranging from 10 g to 100 g.

3. Pouches: Folic Acid  Manufactured by Mediocon Inc powder or granules are packed in pouches made of plastic or paper, with capacities ranging from 1 g to 10 g.

 

Note: The packaging options may vary depending on the manufacturer, product, and market requirements.

 

·   Availability of Products

1.      For API

a.      MEDIOCON INC

             Regd. Add: B-2, Arch Sarthak, G-1, N-7 CIDCO,
             Jalgaon Road, Aurangabad-431003, Maharashtra, India
             Factory Address: Plot No 11, Shendra MIDC, Aurangabad-431154, Maharashtra, India
             Website:  www.mediocon.com  

             Email id:info@mediocon.com 

             Whats app/Cell: +91 7249455639
             GST No: 27DHUPM2366D1ZZ

 

      b. SWAPNROOP DRUGS & PHARMACEUTICALS.

                 Plot No.D-187/16, five star shendra MIDC, shendra

                 Aurangabad- 431154,  Maharashtra, India.

           Tel: + 91-7387999183, +91-240-2994158

           Website: www.swapnroopdrugs.com 

            Email: Swapnroop@gmail.com

 

2.      For Dosage Forms :

Any Local Medicinal Store.